The main purpose:
This grinder is popular in homes, commercial use.
Various grains: sesame, walnut, rice, black rice, soy, mung bean, peanut,lotus seed, corn, broomcorn, barley, buckwheat, oat, etc.
Various dry herbs: almond, poria cocos, red dates, semen euryales, Lycium barbarum, Coix seed, hawthorn, Chinese yam, fleece-flower root,red bean, frankincense, semen cuscutae, Angelica sinensis, Codonopsis pilosula, Astragalus membranaceus, etc.
Suitable for market, store, pharmaceutical processing plant, hospital, clinics, etc.
This machine use activities and the tooth plate relative motion between the fixed tooth plate, the material through the tooth plate impact, friction, shear, impact each other and get crushed material.
The machine features:
1) There is little noise, and the machine is stable when it works.
2) With overload protection reminding to ensure your safety
3)The machine can grind all kinds of food and medicines into 20~200 meshes.
4)Simple operation,non dust and fine powder.
5)No screen,and the thickness can be adjusted.
6)Stainless steel ,structure is simple, low energy, easy to clean, is the ideal grinding equipment.
Flour Mill Machine
Thanks for your use(using) our product-multi-function flour milling machine!
Please carefully read the instruction manual before use the machine.
|2200||110V/60Hz 220V~240V/50Hz 380V/50Hz||2200W||43KG||46.5KGS||71.5X34.5X35CM|
|3000||110V/60Hz 220V~240V/50Hz 380V/50Hz||3000W||51KG||55.5KGS||71.5X38X38CM|
|3600||110V/60Hz 220V~240V/50Hz 380V/50Hz||3600W||55KG||60KGS||71.5X38X41CM|
B,Operation and Adjustment
1. Please open the front cover, fitted the abrasive disc, spring, apical axis,
2. Pls insert the hopper into the feed inlet. Pls don't put much material into
the hopper.every time when the machine are crushing. Avoid to feed too
fast and motor stuck.
3.Order to prevent static abrasive disc rotation loose, please fix it into the
4. Please put dry stuff into hopper, don't put wet stuff.into hopper, otherwise the abrasive disc will be stuck. Then the powder can't come out.
5. Abrasive disc work time must be adjusted according to powder finess require.
Adjust it to loosen the adjustment nut, powder finess by adjusting screw to adjust. Please tighten nut after adjusting.
6. Adjust dynamic abrasive disc: remove dynamic abrasive disc firstly,
then loosen the screw of abrasive disc. And taken down spring,
then fixed dynamic abrasive disc, adjustment abrasive disc until two abrasive
C,Special Safety Rules
1.Please check screw of abrasive disc and feed hopper if it is ok before using the
machine every time.
2.Please clean and dry inside machine after using every time.
3.Please repair or replace the part when the machine parts damaged or abrasion.
4.Do not put the machine inversion please put it horizontal and cut off power.
5.The machine should be installed horizontal on the work table.
6.Please wait a moment to put the material into the machine after turn on
the power. Don't put much material in the machine to avoid much material and motor stuck.
7.Please remove the material from machine when complete the process and
cut off the power suddenly.
8.All material must be dry. And don't left metal or stone and other stuff in hopper.
|Crusher room stick or there are metal stuck in it||There are some metals or stuff in machine,|
then machine part are damaged.
|Cut off power and check hard goods or change part.|
|Grinding is not fine||two abrasive disc is not same level|
abrasive disc is coloboma or breaken
|Adjustment two abrasive disc are same level.|
|Low efficiency||Abrasive disc is not sharp|
Adjustment the space between of abrasive
The material size is too big please crush them suitable size.
|Motor can't work||Feeding too much|
Voltage too low
Abrasive disc get stick
Don't use the machine when the power is not normal.
Adjustment the space of abrasive disc and clean up abrasive disc.
Replace abrasive disc.
|Mill Flour Machine||1 pc|
|Abrasive disc||4 pcs|
|overload switch||1 pc|
|Instruction Manual||1 pc|
3.Motor Mounting Flange
6 Rubber Cushion
8. static abrasive disc
15. dynamic abrasive disc
16. Grinding Sleeve
|Breakdown phenomenon||Breakdown reason||Correct method|
|Motor can not start up or startup difficultly||Check whether the overload switch is damaged,|
The wire diameter is too small voltage is below level
Capacitor is damage .
|replace overload switch|
replace suitable wire,
when voltage is stable to re-start
The temperature is too high
motor bearing damage motor work long time
Replace motor bearing
According to standard time work or pause.
|Machine body is strong quakely||Other part weight not equilibrium|
The coupling is bending deformation
dynamic abrasive disc not equilibrium
|Check the part and adjustment weight equilibrium|
Adjustment dynamic abrasive disc equilibrium